1. Home
  2. Our products
  3. Anchoring technology

Anchoring technology

teaser-bolzenanker-ba-e-plus-850x444px.jpg

Through bolts

EJOT through bolts are the economic solution for the installation of metal and wooden constructions into concrete (facade, ceiling and floor). They meet high requirements for load capacity and safety. The broad range of applications and the scope of dimensions make these through bolts a cost-effective all-rounder.


Application examples:

  • Escalators
  • Lifts
  • Building infrastructure


Advantages of EJOT through bolts:

  • Direct application of loads
  • Setting tools for overhead installation
  • Hot-dip galvanized version available
  • EJOT dimensioning tool


Teaser-Bolzenanker-BA-Plus-Mock-up.png

EJOT Through bolts BA Plus handle online

Learn how to install a BA Plus through bolt correctly.


Try now

teaser-multifix-usf-2021-850x444px.jpg

Chemical anchors: Injection technology

The mortar cartridge is the ideal solution for the embedment of anchor rods in indoor and outdoor areas. Especially when high demands are placed on load-carrying capacity and safety. The EJOT mortar cartridge allows small center and edge distances.


Application range:

  • Bridge construction
  • Balcony railings
  • Tunnel construction
  • Building infrastructure


Advantages at a glance:

  • Can be used in water-filled drill holes
  • A drill hole sealed with mortar protects the reinforcements in the concrete against permanent wetness
  • No spreading, enabling minimal center and edge distances
  • Ideal for perforated brick masonry with a very low mass density


teaser-einschlaganker-850x444px.jpg

Drop-in anchor LAL+

Are you looking for fastening solutions for building infrastructures? The drop-in anchor LAL+ is particularly suitable for the use as a multiple fastener of non-supporting systems in cracked and non-cracked concrete. You can fix e.g. suspension systems, pipelines, air ducts, sprinkler systems, cable racks, machines, brackets and ceiling beams (see ETA 13/0441).


teaser-deckennagel-850x444px.jpg

Ceiling nail

The ceiling nail T-DN 6-35 is suitable for the usage as a multiple fastener of non-supporting systems in concrete. It is approved for concrete strengths from C20/25 to C50/60.


EJOT products for building technology

EJOT Through Bolts BA

Teaser_Übersicht_Betonschrauben_BS1.jpg

EJOT® concrete screw JC2-KB

Application range:

  • Facade scaffolds
  • Temporary fastening
  • Contact surfaces
  • Shelves
  • Cable racks
  • hand rails
  • Battens


Embedment substrates:

Approved for
  • Cracked concrete
  • Pre-stressed hollow core slab
  • Non-cracked concrete
Also suitable for
  • Bricks
  • Solid brick sandstone


Teaser_Übersicht_Betonschrauben_BS2.jpg

EJOT® concrete screw JC2-IT

Application range:

  • Pipe brackets
  • Profile rails





Embedment substrates:

Approved for
  • Cracked concrete
  • Non-cracked concrete
Also suitable for
  • Pre-stressed hollow core slab
  • Bricks
  • Solid brick sandstone


Teaser_Übersicht_Betonschrauben_BS3.jpg

EJOT® concrete screw JC2-ST

Application range:

  • Facade scaffolds
  • Temporary fastening
  • Contact surfaces
  • Shelves
  • Cable racks
  • hand rails
  • Battens


Embedment substrates:

Approved for
  • Cracked concrete
  • Non-cracked concrete
Also suitable for
  • Pre-stressed hollow core slab
  • Bricks
  • Solid brick sandstone